Perfect Fit Blinds Installation Guide
How to install perfect fit blinds easily.
Equipment
- screwdriver
Ingredients
- perfect fit blinds
- pencil
- washing up liquid
Instructions
- First, lay your blind on a flat clean surface with the good side facing down.
- Slot the pieces together as shown in the pictures above.
- Fit the corner cover pieces in to place from underneath and press in to place until you hear them click.
- Now, using a small handheld screw driver, screw down the protruding screws that are already placed here for you.
- Then using the screws that come with the corner piece, screw them in to place too.
- Hold the window frame against the window and using a pencil, mark where the oblong slots line up.
- Lubricate the clips with washing up liquid or hand wash, which was closer to me.
- Push in the clips until they go all the way in, making sure the pencil mark is in the centre of your clip.
- Place your frame in to position, lining the clips up with the oblongs and press until the clips hook in to the oblong holes.
- Finally, hook on the venetian opening and closing control which works with a twisting motion and you’re all done.