Where to Fit Kitchen Cabinet Handles
An easy guide on where to fit kitchen cabinet handles.
Equipment
- handles
- 5mm drill bit
- Combi drill
- Clamps
Ingredients
- scrap wood
- screws
Instructions
- Clamp some scrap wood on the back of your flat packed kitchen cabinet door where you can see brad awl indents.
- Using a 5mm drill bit, predrill holes where the factory marked indents are, going straight through the scrap wood.
- Then place the screws through the holes from the wrong side of the door and line up the handles on the right side.
- Then tighten with a screwdriver and repeat the remaining doors.